(Copyright Pantyhose HQ/Pure Fiction Media Ltd)
Registered name given to a Pretty Polly patented technique of incorporating Lycra into hosiery to give improved fit combined with excellent appearance. An acronym for All Course Elastane In.
A generic term for a type of man-made, similar to natural fibers with characteristics of warmth and softness.
Tights without a reinforced body section, therefore having a sheer appearance from top to toe, giving an elegant look.
Hosiery that covers the foot but only extends up the leg as far as the ankle. Short socks, basically.
Back panel gusset
Fabric panel sewn into the body section of pantyhose to increase their size and improve fit and comfort.
Term relating to a design of the body section of pantyhose which is shaped to follow the brief line and give a more flattering appearance.
Process applied to hosiery to improve final presentation. It's usually carried out after dyeing when damp hosiery is pulled over metal forms (originally made of wood) and subjected to pressure and steam. The temperature achieved (typically 124 degrees centigrade) is sufficient to affect the thermoplastic nature of the yarn used and "set" the shape of the form into the garment. Traditionally most companies use a shaped foot and leg profile former, although some automated machines have straight legs (without a foot shape).
When applied to a knee high, this is a form of elasticated top designed to spread the elastic over a deeper portion of the leg and avoid discomfort and excessive "marking" of the leg.
The number which indicates the compression effect of support hosiery, specifically indicating the comprehensive strength at the ankle. It is actually a value in millimetres of mercury (the blood pressure unit) measured on a HATRA pressure tester as defined in the procedure BS6612. The higher the number, the higher the compression and the greater the effect.
Pantyhose produced with a body section containing sufficient Lycra to provide comprehensive figure shaping in the waist, bottom or thigh area - or any combination of the three. The body section is often opaque in appearance.
Material sometimes used in the gusset of tights to provide enhanced freshness and hygiene. Although often called "cotton", the fabric invariably has a cotton face on a nylon ground. Hence the cotton surface is in contact with the body, while the nylon takes up the dye to provide a uniform external appearance.
Type of heel on a fully fashioned stocking whereby the reinforced part is squared off above the back of the ankle, rather than tapering to a point.
This is one of the most important terms, but quite easy to understand. It's a guide to whether the hosiery is sheer (see through) or opaque (not see through). Low deniers are sheer. High deniers are opaque. Technically it's defined as the weight in grams of 9000 meters of yarn. We classify anything less than 10 denier as ultra sheer. Ultra sheer hosiery looks great and is perfect for warmer weather, but you may need to take care as the fibers will be quite delicate. Standard sheer hosiery tends to be in the 10-20 denier range. This is by far the biggest sector of the market, with the largest selection of products. For daily wear, 15 denier is a popular compromise between appearance and strength. Higher deniers tend to be semi-opaque (around 30 denier) or fully opaque (45-50 and above) although there's significant debate about where one classification finishes and the next starts.
Just to confuse things, certain yarns and some knit constructions produce hosiery which does not correlate with the true denier of the yarn. For example if the yarn is comparatively heavy, it can technically be a higher denier, but give the appearance of a lower denier when worn. In this case manufacturers will sometimes use the term "denier appearance" to indicate how it looks on the leg, rather than the less relevant, though technically more accurate true denier figure. We use the "denier appearance" figure in product descriptions when relevant as it's the most useful guide to the look and feel. The rating, however, is the manufacturer's subjective assessment.
Diamond shaped piece of fabric sewn into the crotch of pantyhose. This is the original type of manual sewn gusset.
The legal declaration of the composition of the garment. Sometimes you will see a phrase similar to "100% nylon excluding waistband." This is because the Lycra used in the waistband is classed as "trimming" and is not representative of the total garment construction and therefore does not need to be declared.
A reinforced area below the waistband (often on sheer through styles) of pantyhose, designed to give added strength in the area likely to be stressed during the fitting process. The band reduces the chance of the wearer's fingers damaging the hosiery during fitting.
The distinctive hole in the welt of a fully fashioned stocking. It's needed to allow the needle sewing the seam to be withdrawn.
An open net structure produced on specialist "weft" knitting machines.
See Point heel.
This refers to stockings that are knitted flat on vintage machinery, and then sewn up the back with a genuine seam and finishing loop. Genuine fully fashioned stockings are now very rare but much sought after. They're still made by Gio, Cervin, Eleganti and Gerbe, with non-stretch 100% nylon yarns on the original machinery from the 1950s.
Belt which has straps to keep stockings in place. Common variants have four, six and eight straps, although it's possible to have up to 20, if you're mad. Known as a suspender belt in the UK.
Foundation wear garment that gives shape to the waist and bottom while at the same time holding up stockings. Genuine classic girdles are still made today by Rago and Stockings and Romance.
A prime requirement for correctly made support (or compression) hosiery is that the level of compression varies along the length of the leg. The maximum value is at the ankle with a progressive reduction through calf to thigh. This is of medical importance in promoting blood flow back to the heart.
Piece of fabric sewn into the body section of the pantyhose to improve the levels of fit, comfort and durability.
The phrase for thigh highs, used in the UK.
Defined as "knitted covering for the feet and legs". A general term covering pantyhose, stockings, socks etc.
Thin (often cotton) gloves which can be worn while putting on sheer hosiery to help reduce the risk of snags from rough skin on the hands.
A type of gusset sewn into the body section of pantyhose to give greater extensibility in order to fit the larger hip sizes more comfortably.
Also known as pop socks. Hosiery which comes up to the knee.
A failure in the knitted fabric construction. A broken yarn or mis-formed stitch causes the loop to collapse into straight lengths of yarn running in a vertical line up and or down the garment.
Lycra is Du Pont's registered trade mark for elastane fiber. It is a man-made fiber that can be produced in a range of deniers and different types. The chief characteristic of Lycra is its ability to stretch (up to five times its original length) and recover totally. By controlling the tension of the Lycra in knitting, the strength of its elasticity can be controlled. Lycra can be used in its bare form (i.e. no covering). This is the most economical, but is not suited to all applications. Alternatively, Lycra can be "single covered" or "double covered". Covering increases the thickness and changes the handle characteristics of the yarn. It also adds to the yarn's durability and costs. It is also possible to mix Nylon and Lycra together by air jet, as an alternative to covering. These are known as air intermingled yarns and are widely used in support stockings and pantyhose. Lycra 3D is the result of new technology which transforms the way hosiery looks and behaves. With Lycra 3D, Lycra is knitted into every course giving a supremely smooth and comfortable fabric with stretch in all directions and a second skin fit. Wearers will experience the exceptional comfort of Lycra 3D hosiery and the clear, even color coverage of the legwear. The unique softness and silkiness is apparent the moment the product is taken out of the pack.
A yarn made up from large numbers of fine filaments to produce exceptionally soft characteristics.
A type of knit construction incorporating tuck stitches usually in a diagonal configuration to give improved durability characteristics.
Nylon is a polyamide yarn. It is a man-made fiber, made from basic ingredients originating from the petrochemical industry. Nylon is naturally bright but can also be de-lustered to give a duller appearance. It can also be produced in differing cross-sections which give different handles and appearances.
Pantyhose knitted as a complete garment to eliminate or reduce the seaming process required using traditional methods.
Garment made from higher denier yarns (typically 40 denier and above) to give opacity.
One piece hosiery in which the two legs are joined at the top via a kind of built-in brief section. In the UK and Europe, pantyhose are called tights, but can reserved for something altogether more opaque.
A weft knitted fabric in which all the loops are intermeshed in one direction. It is often referred to as smooth knit because of the uniform surface of this fabric.
Also known as a French heel, it's the type of heel on a fully fashioned stocking whereby the reinforced part tapers off to a point, helping to accentuate the length and shape of the leg.
The chemical name given to a class of man-made fibers. An alternative generic name for nylon. Polyamide is sometimes used instead of the word nylon in fiber content declarations.
See Knee highs.
Applied to the system for knitting a pouch or shaped heel on a circular knitting machine. Whilst knitting the heel the normal rotary motion of the machine converts to a forwards, backwards repetitive motion - hence the name. A common feature of sock machines, the reciprocated heel on fine hosiery is now fairly rare. Modern yarns will accommodate the shape of the foot so the expensive and complex process was abandoned by all but a few manufacturers. Reciprocated heels are also referred to as reinforced heels, so you'll see them on RHT ranges from the likes of Cervin, Gio, Dore Dore, Eleganti, Clio and more.
The term used to describe sections of a garment that have been strengthened to provide additional durability.
Reinforced heel and toe
Generally stockings that have a reinforced (reciprocated) heel and toe. Classic RHTs are generally made from 100% non-stretch nylon, and along with fully fashioned stockings, are the most reminiscent of the golden era of the 1950s. Note - RHT stockings do not have a seam. RHT hold-ups and pantyhose are also available, but the generic term RHT generally applies to stockings.
See Reinforced Heel and Toe
Hosiery fabric incorporating a multiplicity of tuck stitches. The tuck stitches impact constrictions in the loop structure and damage to the fabric does not normally result in laddering. This construction uses more yarn, give a less sheer appearance and a relatively harsh handle.
Sheer, invisible toe - ideal for wearing with strappy sandals or open toe shoes.
A process in the manufacturing sequence that improves the presentation of the finished product. The dyed garment is processed on semi-automated equipment in which the garment is pulled over a former and subjected to heat. This removes creasing and makes the hosiery more suitable for packaging.
The description given to hosiery styles which have evolved into position between sheer and opaque styles, typically from 25-35 denier.
A description given to a type of reinforcement to the fabric at the toe. It offers a less severe difference in fabric density to the full reinforced toe, but still offers some durability in a high stress area.
Surface appearance demonstrating a slight lustre. Usually the property of a component yarn within the knitted construction.
A widely used, but undefined term, commonly used to describe hosiery which can be seen through - ie the opposite end of the denier spectrum to opaque. Low deniers are more sheer (ie finer and more see-through).
The tradename of the bicomponent yarn produced by Kanebo in Japan. It's used by Pretty Polly in the Sideria Naturals ranges.
Modern hold-ups have an elastic band sewn to the top which has silicone on its inner surface. The stocking stays in position by a combination of elasticity (in the band) and the friction of the silicone against the skin. The performance of the silicone is ruined by contact with body lotion or talc which reduces the friction and allows the garment to fall down. Therefore, if you're wearing hold-ups, don't use moisturizer where the silicone needs to grip.
(see Plain knit)
Another term for thigh highs
Thigh-length hosiery in which each leg is separate, thereby requiring a garter belt or similar to hold in place. In some countries, the word stockings is used as a generic term for hosiery. This is very wrong. Do not encourage it!
Hosiery designed to improve the condition of your legs by improving your circulation. The strength of the effect depends on the compression factor (see above).
See garter belt.
Tradename for a range of nylon yarns originally created by ICL but now owned by Du Pont. The essential characteristics of these yarns is softness of handle created by their low denier per filament make up.
A stage in the processing of certain nylon yarns. The raw nylon yarn is subjected to a combined process of twisting and heating to create a yarn with greater bulk and properties of stretch and recovery. The texturising process converts a flat filament, to a textured yarn with high bulk. Basic nylon styles such as 15 denier smooth knit etc, are made with extruded textured yarns.
Thigh Highs (hold-ups - UK)
Term given by Pretty Polly to self-supporting stockings. Never registered, it is now regarded as the generic name for stockings that stay up without the use of a garter belt, usually with the help of silicone bands which help them stay in place on your thighs.
Common problem resulting in damage to the hosiery. It occurs when hosiery fabric comes into contact with a rough object or surface. Either individual filaments in the yarn or, in a severe case, the whole yarn can be pulled away from the surface of the knitted fabric. In a mild form the result is small fabric imperfections sometimes called snags or threads. In severe form the pulled thread can cause damage to the fabric and possible laddering.
The UK term for pantyhose.
A term applied to a type of nylon yarn which has been through processing to introduce a high level of twist. This creates a yarn with some recovery but without "bulk" associated with texturized yarns. A style made from these yarns is sometimes called Voile. The fabrics made from Torque yarns have excellent sheerness for a given denier and bright surface appearance. However the overall cling properties in wear are limited and multiple sizes are needed to get a good fit.
A description given to the simplest possible body seam to produce a pair of pantyhose. The letter "U" simply describes the shape of the seam.
Very fine hosiery, generally of less than 10 denier.
The band of fabric sometimes knitted beneath the double fabric of the stocking top (welt) is called the under welt. It can also be introduced as a decorative feature especially if printed.
Word adopted by the knitting industry from the weaving industry. (See Torque)
Somewhere between a girdle and very deep garter belt with excellent waist-shaping properties. Occasionally wrongly referred to as a "clincher" but we know better.
As a term specific to stockings, it describes the double thickness at the stocking top used to take the suspender button/clasp.
The thread used to make hosiery. Most yarns are nylon, or a nylon/Lycra mix, but there are plenty of exceptions! See also Fiber content.
Term originating from Japanese hosiery industry, where it describes a hosiery style made with covered elastane on every course. It is very similar to Lycra 3D.
Visit our homepage or go back one page.